Displaying items by tag: guitar rebuild
A quick video to show the cleaning of the hardware. Please check the cleaning fluids here on small pieces of your hardware before you follow these instructions.
The dents, bumps, holes and scrathces in body of the guitar have been dealt with in the previous section. Now the fillers need to be sanded down and the suface needs to be prepared to accept the spray paint.
The scratch plate and pickguard, as well as loading the electronics was done before the body so that we can measure exactly how big the body cavity needs to be to accommodate the humbucker pickups and wiring.
A look at the guitar electronics and pickup wiring, the scratchplate/pickguard and the installed killswitch.
Over the next months I will be reviving an old westfield guiter (note no caps on westfiled, just doesn't deserver it). This is the first video to introduce the project.