Built in Scotland Buffer Pedal. No tone colouring, RF Rejection, high-Z to Low-Z. The Genesis Buffer pedal is designed and built by SineEffects for Krachwerke. It is a small, durable and high quality signal buffer for guitars and basses. It changes the signal from your pickups to a Low Impedance signal which allows your signal to be sparklingly healthy and travel along longer leads without high frequency (and thus tone loss) loss. It also filters ultra high frequencies via RF Rejection and is very small as to not waste space on your pedalboard. It does this without colouring the tone or any tone-suck.
The famous Shure SM57, famous for its decades of reliability in the studio for recording loud things like electric guitar, snare drums etc is being A/B compared to the obviously wanna be Pyle Audio PDMIC78.
Please check our full demo and review of the Sine Effect Electronics MegaPara multiband parametric equaliser pedal. More knobs than in parliament and more tone shaping than a ring in a champagne glass.
The Disphoria is a distortion pedal made by Sine Effect Electronics. It is a very open and transparent distortion pedal with a huge amount of gain.
A quick video to show the cleaning of the hardware. Please check the cleaning fluids here on small pieces of your hardware before you follow these instructions.
See the full 3 part video tutorial on how to setup your guitar from scratch. Please have a look at our tutorial which takes you through the complete guitar setup process. It explains in details how to level your frets, set the truss rod, restring your guitar and set the intonation.
The dents, bumps, holes and scrathces in body of the guitar have been dealt with in the previous section. Now the fillers need to be sanded down and the suface needs to be prepared to accept the spray paint.
The scratch plate and pickguard, as well as loading the electronics was done before the body so that we can measure exactly how big the body cavity needs to be to accommodate the humbucker pickups and wiring.