Guitar Pedal Online Shop and Resource

A quick video to show how to fix dents and scratches and fill in holes on a guitar body

A look at the guitar electronics and pickup wiring, the scratchplate/pickguard and the installed killswitch.

The Pyle Pro PDC22 is an unpowered Dual Direct DI box. It converts unbalanced signals to balanced signals andbalanced to unbalanced. It also features a parallel out in order to loop a signal back. The DI also has a -0dB, -20dB and -40dB which allows you to connect higher powered connection to it to send via balanced out like amp speaker outs etc. It also features a ground lift. It is of full metal construction and in my tests noiseless. It does exactly what it is requested to do.

What we tried to achieve here was a very clean matt headstock. Black decal on white. We wanted the logo to be applied in a way that you can't see how it was applied.

This seems more than a worthy KickStarter to support. The O'Keefe Music Foundation that brought us 46 and 2 cover by Tool want to keep going.

In this video we use the fret rocker to check for frets that might be hight or low and adjust them with a file. we also ase a fret board protector to prevent any damage to the fret board near the frets we are working on.

Guitar rebuild project part 3, Fret and fret board cleaning and straightening the neck

Video two of our guitar rebuild project. In this video we just show the parts we intend to use.

The DigiTech Grunge pedal is a high gain affordable distortion pedal. The sounds is full and good and but the gain seems a bit higher than I would expect for a 'grunge' tone.

Over the next months I will be reviving an old westfield guiter (note no caps on westfiled, just doesn't deserver it). This is the first video to introduce the project.